Replacement single pole contactors and contacts for 0-65V and 0-85V output heat treatment
| Stock Ref: | Description: | |
|---|---|---|
| 10354 | Single pole 250A contactor |
|
| 10356 | Fixed contact for single pole contactor |
|
| 10357 | Moving contact for single pole contactor |
|
| 10370 | Single pole contactor for use with units 11000 and |
|
The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive and Inductive loads. The SW200 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.
The SW200 has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or mounting brackets – either supplied fitted, or as separate items.
Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. If the requirement is for downwards
Replacement double pole contactors and contacts for 32.5-0-32.5V and 42.5-0-
| Stock Ref: | Description: | |
|---|---|---|
| 10359 | Double pole 250A contactor (assembled) |
|
| 10360 | Fixed contact for double pole contactor |
|
| 10360 | Moving contact for single pole contactor |
|
The SW190 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW190 is suitable for switching Resistive, Capacitive and Inductive loads.
The SW190 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW190 has M8 stud main terminals and 6.3mm spade coil connections.
It can be mounted via M5 tapped holes or mounting brackets – either supplied fitted, or as separate items. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.
If the requirement is for downwards orientation we can adjust the contactor to compensate for this.
Leave the application on our website or by phone
The manager will contact you for further details
We will gladly deliver your order soon
